Skip to product information
JCB 332-A3098 Digital Manual
$25.00
JCB 332-A3098 Digital Manual
A digital technical reference for your equipment.
Manual details
- Brand / equipment: JCB
- Manual type: Technical Manual
- File size: 1.94 MB
- Pages: 55
- File format: PDF
- Language: English
Contents listed in this manual
- SAFETY NOTICES i
- Workshop Standards i
- About this Manual
- Units of Measurement
- Carrier Machine - Suitability
- Warranty
- Basic Description
- Page Numbering
- GENERAL DESCRIPTION
- Check List - Equipment HM 2180/1180
- Attachment Identification
- Component Identification
- Lifting
- Check List - Equipment HM 380/480
- SAFETY
- Safety First
- Safety Check List
- TECHNICAL SPECIFICATION
- HM 380
- HM 480
- HM 1180
- HM 2180
- Power Cell Illustration
- SERVICE
- Dismantling
- Inspection of Parts
- Tool Retaining Pins
- Wear Limits - Tool and front Bush
- Wearing Parts
- Removal of Parts & Deburring
- Deburring
- Cylinder Bush
- Cylinder
- Use of the Buffer Cylinder
- Piston
- Damage on the Piston Contact Surface
- Assembling
- Fitting a New Bush
- CHARGING THE ACCUMULATORS
- TORQUE TABLES
- AUTOMATIC GREASING SYSTEM
- Self Contained Recharging Greasing System
- Parts List
- SPECIFICATION
- Requirements - HM 380 & HM 480
- Requirements - HM 1180 & HM 2180 32PARTS LIST
- HM2180/1180 - Power cell -Wear Parts
- Power cell 2180/1180 - Illustration
- Power Cell 2180/1180 - Parts List
- HM 2180/1180 - Housing Illustration
- HM2180/1180 - Parts List
- HM380 - Sideplates
- HM 480 - Sideplates
- HM 380 - Power Cell - Illustration
- HM380 - Power Cell - Parts List
- HM 480 - Power Cell - Illustration
- HM 480 - Power Cell - Parts List
- HM 380/480- Power Cell - Wear Parts
- WARRANTY(To be advised) At the rear of this
- book.
- NOTE
- IF THE BREAKER HAS BEEN DISPATCHED FROM JCB
- ATTACHMENTS BYAIRFREIGHT THE
- ACCUMULATOR NITROGEN GAS WILL HAVE BEEN
- DISCHARGED. THIS WILL REQUIRE RECHARGING
- BEFORE THE BREAKER ENTERS SERVICE.
- 332/A3098-1
- i i SAFETY NOTICES
- In this manual there are safety notices. Each notice
- starts with a signal word. The signal word meanings
- are given below.
- ?DANGER
- Denotes an extreme hazard exists. If proper
- precautions are not taken it is highly likely that you (or
- others) could be killed or permanently injured.
- INT-1-2-1
- ?WARNING
- Denotes a hazard exists. If proper precautions are not
- taken you (or others) could be killed or injured.
- INT-1-2-2
- ?CAUTION
- Denotes a reminder of safety practices. Failure to
- follow these safety practices could result in injury to
- the operator (or others) and possible damage to the
- equipment.
- INT-1-2-3
- Workshop Standards
- JCB HM Breakers have hydraulically powered percussion
- mechanisms. Since all hydraulically powered equipment is
- sensitive to dirt, the breakers must always be
- disassembled in a place that is:
- . Isolated from all dust and particle-generating
- activities such as grinding and welding.
- .Very clean,ie. free of dust and dirt.
- .Equipped with washing facilities and compressed air
- for the blow drying of components after washing.
- .Equipped with all necessary standard and special tools.
- 332/A3098-1?WARNING
- The tool must not be modified without the
- manufacturer’s permission. Use only original parts and
- accessories approved by JCB Service. If modifications
- are made that are not approved by JCB Service
- serious harm to yourselves or others may result.
- All users of this instruction manual are asked to inform
- JCB Attachments if they find any errors or discrepancies,
- especially any affecting product safety.
- Use only authorized parts. Any damage or malfunction
- caused by the use of unauthorized parts will not be
- covered by any Warranty or Product Liability.
- this manual or any part hereof is prohibited. This
- applies in particular to trademarks, model
- denominations, part numbers and drawings.
- Service Personnel
- Distributor Service Engineers who are receiving, or have
- received, training by the JCB Training Centre or by JCB
- Service Personnel. These personnel should have a sound
- knowledge of workshop practice, safety procedures and
- general techniques associated with the maintenance and
- repair of hydraulic equipment.
- Renewal of seals, gaskets etc. and any component
- showing obvious signs of wear or damage is expected as
- a matter of course. It is expected that components will be
- cleaned and lubricated where appropriate, and that any
- opened hose or pipe connections will be blanked to
- prevent excessive loss of hydraulic fluid and ingress of
- dirt. Finally, please remember above all else - SAFETY
- MUST COME FIRST!
Before you order
Check the model, edition, serial-number coverage and real preview pages against your equipment.
Digital product
Digital manual only. No printed book or physical item will be shipped.