Skip to product information
JCB AA-6HK1T BB-6HK1T Engine Workshop Manual 9806-2200
€19,99
JCB AA-6HK1T BB-6HK1T Engine Workshop Manual 9806-2200
A digital technical reference for your equipment.
Manual details
- Brand / equipment: JCB
- Manual type: Workshop / Service Manual
- File size: 14.63 MB
- Pages: 241
- File format: PDF
- Language: English
Contents listed in this manual
- 00 General Information
- 6A Engine Mechanical
- 6B Engine Cooling6C Engine Fuel
- 6D Starting and Charging
- 6E —
- 6F —
- 6G Engine Lubrication
- 6J Engine Induction
- GENERAL INFORMATION 0A–1
- GENERAL INFORMATION
- General Repair Instruction. . . . . . . . . . . . . . . . . . . . 0A-1
- General Repair Instruction
- 1. Before performing service operations, disconnect the
- 2. Use a cover on body, seats and floor to protect them
- against damage and contamination.
- 3. Brake fluid and anti-freeze solution must be handled
- with care because they can cause paint damage.
- 4. The use of proper tools and special tools, where
- specified, is important for efficient and reliableperformance of service repairs.
- 5. Use genuine Isuzu parts.6. Used cotter pins, plastic clips, gaskets, O-rings oil
- 7.To facilitate proper and smooth reassembly
- 8. Clean the parts before inspection or reassembly. Also
- clean oil ports, etc. using compressed air, and makecertain they are free from restrictions.
- 9. Lubricate rotating and sliding faces of the parts with
- oil or grease before installation.
- 10.When necessary, use a sealer on gaskets to prevent
- leakage.
- 11.Carefully observe all specifications for nut and bolt
- torques.12.When a service operation is completed, make a final
- check to be sure the service has been done properlyand the problem has been corrected.
- 13.Allow the engine to cool before beginning any service
- procedure.
- This will eliminate the danger of fire and possible
- injury.
- 14.Hot steam under pressure may escape from the
- 15.Hot engine oil can cause severe skin burns. Allow the
- engine to cool before draining the engine oil.
- 16.While working around a running engine, avoid contact
- with moving parts and hot surfaces to prevent injury.
- 17.Wear safety glasses when using compressed air.
- Flying particles may cause eye injury.
- 18.Always wear safety goggles when working with fuel to
- protect the eyes from fuel splash.
- 19.Test fluid from the injection nozzle tester will spray out
- of the injection nozzle under great pressure.
- It can easily puncture a person’s skin.Keep your hands away from the injection nozzle at all
- times.
- 20.Do not use your fingers to feel for fuel leaks at fittings.
- Fuel pressure is high enough to penetrate the skin.
- 21.Be careful when changing fuel system components:
Before you order
Check the model, edition, serial-number coverage and real preview pages against your equipment.
Digital product
Digital manual only. No printed book or physical item will be shipped.