JCB Micro Micro Plus 8008 8010 Mini Excavator Factory Workshop Service Manual 98 - preview 1

JCB Micro Micro Plus 8008 8010 Mini Excavator Factory Workshop Service Manual 9803/9310-5

€19,99
Skip to product information
JCB Micro Micro Plus 8008 8010 Mini Excavator Factory Workshop Service Manual 98 - preview 1

JCB Micro Micro Plus 8008 8010 Mini Excavator Factory Workshop Service Manual 9803/9310-5

€19,99

JCB Micro Micro Plus 8008 8010 Mini Excavator Factory Workshop Service Manual 9803/9310-5

A digital technical reference for your equipment.

Manual details

  • Brand / equipment: JCB
  • Manual type: Workshop / Service Manual
  • File size: 16.47 MB
  • Pages: 305
  • File format: PDF
  • Language: English

Contents listed in this manual

  • Machine Model and Serial Number ... ....................................................1-1
  • Using the Service Manual .....................................................................1-1
  • Machine Identification Plate ........... .......................................................1-3
  • Component Identification Plates ..... .......................................................1-4
  • Torque Settings
  • Zinc Plated Fasteners and Dacromet Fasteners .......................................
  • 'O' Ring Face Seal System ................ ....................................................1-9
  • 'Torque Stop' Hose System .................................................................1-12
  • Consumables
  • Sealing and Retaining Compounds .........................................................
  • Terms and Definitions
  • Hydraulic Schematic Colour Codes .....................................................1-15
  • About this Manual
  • Machine Model and Serial Number
  • This manual provides information for the following
  • model(s) in the JCB machine range:
  • – Micro from serial number M1148300
  • – Micro Tier 3 from serial number M1149553
  • – Micro Plus from serial number M1007000– Micro Plus Tier 3 from serial number M1007129
  • – Micro 8008 from serial number M1239500
  • – Micro 8010 from serial number M1149553
  • Note: The JCB Micro Excavator is available in a number of
  • used in this handbook.
  • Using the Service Manual
  • T11-004
  • Distributor Service Engineers who are receiving, or have
  • received, training by JCB Technical Training Department.
  • These personnel should have a sound knowledge of
  • workshop practice, safety procedures, and general
  • techniques associated with the maintenance and repair of hydraulic earthmoving equipment.
  • Where the machines differ, the text and/or the illustration
  • will specify.
  • manual, as well as specific warnings. Read all safety
  • statements regularly, so you do not forget them.
  • Renewal of oil seals, gaskets, etc., and any component
  • showing obvious signs of wear or damage is expected as
  • a matter of course. It is ex pected that components will be
  • cleaned and lubricated where ap propriate, and that any
  • opened hose or pipe connections will be blanked to
  • prevent excessive loss of hydraulic fluid and ingress of dirt.
  • Where a torque setting is given as a single figure it may be
  • reduced by one third.
  • The manufacturer's policy is one of continuous
  • be accepted for discrepancies which may occur between
  • Finally, please remember above all else safety must come
  • first!
  • T11-005
  • with Dismantling, Overhaul etc. of specific components, for
  • example:
  • operation descriptions etc. are inserted at the beginning of
  • service tools.
  • 2 Care and Safety - includes warnings and cautions
  • pertinent to aspects of workshop procedures etc.
  • 3 Maintenance - includes service schedules and
  • recommended lubricants for all the machine.
  • A Attachments
  • B Body and Framework, etc.

Before you order

Check the model, edition, serial-number coverage and real preview pages against your equipment.

Digital product

Digital manual only. No printed book or physical item will be shipped.

You may also like